Washer and Castle nut for 1 Inch BT8 Spindle
Updated 08/30/2017 | Published 08/29/2017
Products Featured in This Question
Question:
Hi, I purchased a number of items from you a few years ago and I am coming back looking for more parts. One item I got last time was the BK1-100 Bearing Kit for 1inch BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal.....and I have swapped bearings out a few times since then. My existing setup actually has no washer which I thought was odd and I think you might have the washers I need to fit over the spindle and fit within the hub easily. I also wondered about the castle nuts as mine only have 2 notches, not 6, so loading the bearings has been a problem.
asked by: Jay
1
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Long Is The Malone LowBed MicroSport Trailer With The Retractable Tongue Kit
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Are D-Washers and Tang Washers Both Necessary on Trailer Spindle
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Hub for a Malone LowBed MicroSport Trailer MAL25FR
- Q&A: Replacement Hub/Drum and Brake Assemblies for 92865A
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer