Replacement Rectangular Door Switch for Kwikee Steps

Question

Question:

I have Kwikee steps 900874 on a 96 Winnebago. The book lists a step switch 905306 rectangular magnetic surface mount. It is Normally closed to extend the steps, open when the magnet is present. Is this the correct replacement - LC379406? Thank you.

asked by: Michael J

0

Expert Reply:

If your old switch was rectangular then Lippert Components Kwikee Large Rectangle Door Switch Kit Item # LC379406 is indeed the correct switch for you. If your switch looks different email me a picture of it and I can determine which is the correct replacement.

expert reply by: Michael H

0

Answer 1

Thank you so much for attaching a picture of your steps! It definitely helped me identify the part you need. I confirmed with my technician at Lippert (the makers of Kwikee steps) that the part you need is the Replacement Rectangle Door Sensor for…

view full answer...

Answer 2

I spoke with Lippert and they told me that the Lippert Components Kwikee Large Rectangle Door Switch Kit part #LC379406 is indeed correct for your 2008 Winnebago Access Motorhome as it has a normally closed circuit.

view full answer...

Answer 3

The entry step rocker switches are pretty universal so you should be able to just use the Replacement Center Rocker Switch for Kwikee Electric RV Steps part #LC371010 and wire it according to the diagram below.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Hey Jared, the pass through amp rating of the Rich Solar NOVA 3K12 3000W 12V Pure Sine Wave Inverter with Built-in Transfer Switch for RVs #RS79VR is 30 amps. What AC units do you have? This should be more than enough for that.

view full answer...

Answer 6

The correct replacement control for your 1510000140 step control is the Replacement Control Unit for Kwikee #LC363985. Since most of your functions seem to be working correctly, I would start by checking the 4-way connector before replacing the…

view full answer...

Answer 7

Thank you for all of that information, I was able to use the PN:909510000 (Kwikee part number) to locate the correct replacement control unit for your steps. The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 is the correct…

view full answer...

Answer 8

For your Kwikee Steps, the correct replacement motor is the: - Replacement Motor for Kwikee Electric RV Steps #LC379147. This is the correct replacement motor for your Kwikee steps and corresponding gear box the Replacement Gear Box and A Linkage for…

view full answer...

Answer 9

The Brophy Clamp On Camper Tie-Downs #HSSF will have a very slight amount of play since there is a compressible pad to prevent scratches on the bedrails, but it sounds like you're having much more significant play. I've attached a picture…

view full answer...

Answer 10

Hi Randall, So the switch is going to depend on the control unit you have; is it an all-black IMGL control unit? Can you describe what your current switch looks like by chance?

view full answer...

Answer 11

For a replacement step for what you have now that shows part number 725-0042 the correct set is the Kwikee 32 Double Step part #LC3722617.

view full answer...

Answer 12

The Replacement Control Module for Lippert Electric Coach Step #LC301702 is the correct fit for your Lippert Coach step. The long green wire with the ring terminal is your ground and will be attached bare metal to metal on our coach frame. The short…

view full answer...

Replacement Rectangular Door Switch for Kwikee Steps

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching