Replacement Rubber Plug for Trailer Jack To Cover Manual Crank Hole

Question

Question:

i need a replacement rubber ring that goes around the hole that the crank shaft for the jack fits in. this is on the side of the trailer just at the peak, a lug nut hole where the crank fits in. the hole has a rubber ring that fits in to protect the paint of the trailer and lines the hole. the one i have is cracked and keeps falling out. do you have this item?

asked by: Christine

0

Expert Reply:

I believe what you are describing is the Rubber Plug that fits on the inside and covers the outside of the trailer jack where the manual crank insert is.

We have the following option:
Replacement Rubber Plug for Ultra-Fab Electric A-Frame Jacks # UF38-751114

expert reply by: Jason S

0

Answer 1

We have just the replacement microwave for you! The Furrion Standard RV Microwave #FMSN09BL has 6 auto-cook settings and 10 power levels to heat your quickly and efficiently. The microwave has an LED display that shows the timer, clock, and other…

view full answer...

Answer 2

You will need a 3 inch hole to mount the Trailer D-Ring, Light Duty Tie Down, item #RR01C, on your trailer.

view full answer...

Answer 3

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Replacement Rubber Plug for Trailer Jack To Cover Manual Crank Hole

Featured Help Information

Miscellaneous Media

Continue Researching