Replacement Bearings And Seal For 1998 Triton Trailer WCII
Updated 08/09/2017 | Published 08/08/2017 >
Question:
Hello, I have a 1998 Triton Trailer WCII and I need a bearing replacement kit. Do you carry this product? Thanks
asked by: Rob
Expert Reply:
In order to know what bearing kit you need, I need some bearing numbers from you or some spindle measurements. When you remove one of your hubs, you will find an outer bearing, an inner bearing, and a grease or oil seal. There are numbers printed on the face of each one. If they are legible, let me know those numbers and we can get you the proper replacements.
If those numbers are not legible, the spindle diameter will need to be measured in 3 locations. I've attached a photo to assist and recommend using a digital caliper like # PTW80157 because these measurements need to be precise.
Once you have the bearing and seal numbers or the spindle measurements based on the attached photo or article, I can help you with the correct replacement parts.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: l44610
- Search Results: l68110
- Search Results: nok ad2548 eo
- Shop: Timken L68110 Replacement Race
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: Timken Replacement Bearing and Race Set - L68149 and L68111
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Which Grease Seal is Associated with L68149 Bearing and L68110 Race on a Boat Trailer Hub
- Shop: Grease Seal
- Q&A: Recommended Replacement for Single Lip Grease Seal 16667
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Diameter of Spindle Washer # SW1000 and Wobble Roller Retainer Ring CE10981
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)




