What Does Code L. Mean on Curt Triflex Brake Controller
Updated 08/07/2017 | Published 08/05/2017
Question:
My curt triflex is throwing up a code. Cant find this code on any curt website. Have had troulbe5with this past two weeks. Dealership that installed it said everything is wired and working correctly. And they will not help me out. I have attached a picture of my controller and the code is more up on it.
asked by: Jacob C
Expert Reply:
The L. display should show up on the Curt TriFlex brake controller, # C24VV, when it is plugged in. When you are installing the controller, the trailer should not be connected.
The lever or button on the left side of the controller is the sensitivity adjustment. The L. should change when that lever is moved. You can also try resetting the controller by unplugging it for a few minutes and then plugging it back in (without the trailer connected). If these things do not fix the issue then there is likely a problem inside the controller and it will need to be replaced.
Product Page this Question was Asked From
Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Plug-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LCD Display
- Single Trailer Only
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Classic Accessories RV Captain Seat Cover
- Shop: Vehicle Seat Covers
- Shop: Brake Controller
- Video: Let’s Check Out the B and W Rubber Cover for Empty Turnoverball Socket
- Shop: B&W Rubber Cover for Empty Turnoverball Socket
- Video: Let’s Check Out the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Q&A: Troubleshooting Curt Triflex Brake Controller that Stopped Working with Brakes
- Q&A: How Do I Measure To Find The Center of the Hole For My B&W Turnoverball Gooseneck On 2014 F-150?
- Q&A: Troubleshooting "L Indicator Code On Curt TriFlex Trailer Brake Controller
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Q&A: Troubleshooting r.C. Error Code on Display of Curt Triflex Brake Controller
- Q&A: Where are the Ground Wires Located on Electric Trailer Brakes
- Q&A: No Trailer Connected Error on Tekonsha Prodigy P3
- Shop: Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts
- Shop: Vehicle Engine Heaters
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Trailer Wiring
- Video: Review of B and W Gooseneck - Below the Bed - BWGNRK1313
- Video: Maintaining Your Gooseneck Hitch and Ball
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: Checking Out the B and W Rubber Cover for Stowed Turnoverball
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Video: DIY Install: Timbren Rear Suspension Enhancement System on your 2016 Honda Odyssey
- Search Results: trailer hitch
- Video: How to Choose a Trailer Brake Controller
on Trailer Brake Controller
