Where to Find Brake Controller Install Harness Location on 2016 Toyota Tacoma

Updated 07/31/2017 | Published 07/28/2017

Question:

I can not locate where this connector is The toyota diagram does not help much. Can you show me where to find it? And Do I need a connector? Thanks

asked by: Tony

Helpful Expert Reply:

I have spoken to Cequent and they have confirmed that the Tacoma's plug can be found lower driver side kick panel (next to where a foot actuated parking brake might go) you may need to actually pull it somewhat out to expose the plug.

We have heard it is difficult to find. I attached a picture that shows where one Tacoma owner found the correct connector to plug in the part # 3031-P.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.

To install this you'll want the part # 3031-P to make the job easier. Otherwise you'd need to cut off the connector on the vehicle and hardwire it to the controller.

expert reply by: Jameson C