What is the Total Weight of the B and W Companion Slider Hitch part # BWRVK3370

Question

Question:

I would like to know the total assembled weight of the hitch.

asked by: Chuck B

0

Expert Reply:

The total weight of the B and W Companion Slider Hitch part # BWRVK3370 that you referenced is 266 lbs.

expert reply by: Jameson C

0

Answer 1

Hi Bruce; the distance from the top of the shank to the bottom of the ball in the lowest position on the B&W Tow & Stow 2-Ball Mount #BWTS20037B is 9.96". That would be with the 2-5/16" ball at the bottom. I don't have an exact…

view full answer...

Answer 2

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 3

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Answer 4

While in theory you can hook up your 5th wheel with a Companion slider like the B&W Companion OEM 5th Wheel Hitch w/ Slider #BWRVK3775 in the rear position because it does lock out in the rear position, it would not be a good idea. That is not…

view full answer...

Answer 5

The Rhinobox was definitely an unpopular choice for manufacturers to go with so swapping it out with the MORryde Cushioned 5th Wheel Pin Box for 18K to 21K Trailers w/ Lippert Rhino #MR55QR would definitely give you a major improvement in ride…

view full answer...

Answer 6

All of the parts combined for B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1108 weigh about 90 pounds. The only part that can be removed once installed is the ball. The ball itself weighs about 9 pounds. I have linked a video showing…

view full answer...

Answer 7

Yes, you will need a deep well 15mm socket, though you do not need to lift the back end of your 2020 Ford F-250 to install the Timbren Suspension Enhancement System #TFR250SDJ.

view full answer...

Answer 8

Hey Jerry, thanks for reaching out. The short answer is yes, probably but it really depends on your exact setup. When you slide the Companion back, you gain cab clearance but lose space at the tailgate, and with a MorRyde pin box being a bit bulkier,…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Robert, congrats on the new 5th wheel trailer! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box like item #MR47MV has not been approved for use by Lippert. The only gooseneck style pin box that has are the Reese Goose Boxes like item #RP85FR.…

view full answer...

Answer 11

Congrats on the new truck Larry! We haven't had a chance to install the Firestone Air Helper Springs item #F2613 on one of the new 2024 Sierra 3500 AT4's. I can tell from looking at the instructions and some of our other installs you'll…

view full answer...

Answer 12

Hello Anthony, Since your 2016 Ford F-250 Super Duty has the standard size bed 6.7' you are going to want a sliding hitch to ensure that you have the clearance on those sharp turns, no one wants to ruin their vacation by taking out the cab of…

view full answer...

What is the Total Weight of the B and W Companion Slider Hitch part # BWRVK3370

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching