Measuring Spindles For Replacement Bearings And Seals For 1993 Jayco 1206
Updated 07/06/2017 | Published 07/04/2017
Question:
Im trying to figure out what wheel bearings and seals my trailer requires. Id like to have all the parts needed before I start the job. 1993 Jayco 1206 Any idea? Thanks
asked by: Kirby
Expert Reply:
For your 1993 Jayco 1206 trailer, I can't confirm a fit without your help. There is not a master chart of bearing sizes and spindles that fit with trailers. I will need you to either find the bearing numbers listed on the face of the inner and outer bearings of your hubs and the number on the seal, or I will need you to measure your spindle with a digital caliper at the bearing and seal locations. I've attached a photo to assist.
If you don't have a caliper, I recommend the 4" Carbon Fiber Digital Caliper # PTW80157
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Dimensions of CES38WR Spindle
- Q&A: Looking For Replacement Leaf Springs For Sure-Trac Pro Series Trailer
- Q&A: Greasable Shackle Bolt that is 3-1/2 inch Long and 9/16 inch Diameter
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub