Trailer Wiring Harness to Fit 2005 Jeep Liberty Renegade

Updated 06/06/2017 | Published 06/04/2017

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(416)

$59.84

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

(4781)

$269.00

Blue Ox Trailer Hitch Receiver Lock for 2" Hitches

(198)

$34.94

Question:

Wondering if the wiring setup on C55382 will work for renegade package I do not have the tow package but do have an aftermarket tow hitch, I know it looks same as the basic Liberty but just wanna check before ordering

asked by: Todd M

Expert Reply:

The Curt Trailer Wiring Harness # C55382 is designed to fit all models of the 2005 Jeep Liberty so it will work just fine on your Renegade. The harness installs by plugging in behind each tail light. I've linked a video of the install process for you.

In addition to the hitch you already have and the wiring harness, to tow a trailer you'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.

One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.

For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.

I've also included links to some articles on towing that you might find helpful.