1in D Washer Recommendation for 1 Inch Diameter Spindle
Updated 03/14/2011 | Published 03/11/2011
Products Featured in This Question
Question:
I need a d-style washer for a axle spindle with 1 od threads, which product # do I need? Thanks,
asked by: John
0
Expert Reply:
If the axles of your trailer are rated between 3.5k and 5.2k I would recommend that you use the TruRyde D Washer, part # 5-23, that you referenced.
If you have axles that are rated between 6k and 8k I would recommend you use the Redline D Washer, part # 5-57.
I attached a link to a video of a trailer hub being removed and reinstalled from a trailer that you might find informative.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Length of Parking Brake Kit Cable
- Q&A: Material of D Washer for EZ Lube Spindle
- Article: Trailer Wiring Diagrams
- Article: What RV AC Will Work With Your Setup? Avoid Costly Mistakes Before You Order
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Q&A: Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-90 PHEV
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Replacement Solera Arms for Awning that Measure 63 inches
- Q&A: Difference Between the Camco RV Vinyl Insert 25212 & 25312
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision