How to Determine Axle Diameter for Over-Under Kit
Updated 04/19/2017 | Published 04/18/2017
Products Featured in This Question
Question:
Hello, I am the proud owner of a 1972 skylark no-160 travel trailer, and I am looking for an axle over/under conversion kit. The problem is that I cant determine if the axle is 2-3/8 or a 3 inch one. It is a single axle approximately 16 feet long. I was hoping you would be able to help me figure out what product would be best for me. Item # K71-385-00 OR Item # K71-384-00 Thanks for the help
asked by: Jordan W
Expert Reply:
Your best bet is to use a digital caliper, like # PTW80157, and measure the diameter of the axle tube.
Then, like you said, you'll need # K71-385-00 for a 3 inch axle or # K71-384-00 for a 2-3/8 inch.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Dimensions of CES38WR Spindle
- Q&A: Looking For Replacement Leaf Springs For Sure-Trac Pro Series Trailer
- Q&A: Greasable Shackle Bolt that is 3-1/2 inch Long and 9/16 inch Diameter
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub