Base Plates, Light Kit, Safety Cables, and Braking System to Flat Tow a 2006 Toyota Tacoma  

Question:

Expert Reply:

The Roadmaster XL Base Plates, # 1175-1, are compatible with your 2006 Toyota Tacoma as long as it is not an X-Runner. They will also fit the Roadmaster Stowmaster Tow Bar, # RM-501. I have included a link to the installation details and a video review of the tow bar for reference.

To complete the towing set up for your truck, you will need safety cables, lighting, and a supplemental braking system as required by law. For safety cables, I recommend RoadMaster 64 inch Single Hook, Coiled Safety Cables, # RM-643. The base plates provide attachment points for the cables. The other end will attach to the hitch on the towing vehicle.

For lights, there are a couple of options. If you do not plan on towing the truck often, I recommend magnetic light kit # RM-2120. If you do plan on towing it frequently, I recommend installing diodes, # 38955. I have included a video along with a couple of FAQ articles on tow bar wiring that should help in choosing the best light kit for your application along with how to go about wiring them.

For a braking system, the easiest to use and install would be the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400. This system installs quickly so you are ready to go in minutes. It engages the towed vehicle brakes proportionally to how much the towing vehicle is braking, reducing wear of both vehicles brakes.

Finally, you will need to check with the manufacturer and/or your vehicle owners manual for instructions on the proper procedure for towing your vehicle because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed.

expert reply by: Michael H

0