Will Pullrite Superglide Fifth Wheel Hitch Work With Demco 5th Wheel Rail Adapter # DM6099

Question

Question:

will a pullrite super glide model 2900 fit demco 5th wheel rail adapter for ram oem 5th wheel towing package?

asked by: Frank C

0

Expert Reply:

If your Pullrite SuperGlide fifth wheel hitch fits in industry standard rails then the Demco 5th Wheel Rail Adapter, part # DM6099 will work for you.

The adapter is designed to work with Ram trucks that have the OEM fifth wheel prep package.

expert reply by: Jeffrey L

0

Answer 1

Yes, it will. The Pull-Rite Super Glide 5th Wheel Hitch mounts on industry standard rails which is exactly what the Adapter Rails for Curt 5th Wheel Hitch item #C88KR provide. This adapter will drop right down into the puck system of the Ford OEM…

view full answer...

Answer 2

If the Pullrite Superglide is an ISR style fifth wheel hitch which is designed for the rails that the Curt kit part #C16411-204 provides this will work. But there are two types of rails Pullrite designs their hitches for with one of them being for…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 7

Hi David, that’s a really good question and I’m glad you’re looking at the bigger picture here, because this is exactly where people start thinking about long term stress and not just whether something will fit. Before I get into that, The Gen-Y…

view full answer...

Answer 8

Hey Brandon, The Pacbrake Alpha Air Bags #PB42RV do not increase the total towing capacity of the vehicle. The capacity on these airbags refers to the load leveling capacity. The amount of support it will provide is up to 5,000lbs to help level out…

view full answer...

Answer 9

I sure can Michael, and welcome back! Your Curt axle uses a 2.25" inner diameter 10-36 grease seals. To carry around a set of spares you'll want the Grease Seals 10-36 (pair) item #RG06-070. The Dexter Bearing Kit for 7.2K - 8K Axles - Inner…

view full answer...

Answer 10

Hey John! The Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY37ND is not Lippert approved yet. This is designed to replace a pin box with a Lippert Rhino bolt pattern, and is the same exact length as the factory pin box. Gen-Y does stand behind…

view full answer...

Answer 11

It sure is Adam. Your 2024 Brinkley Model G3950 comes with three 7,000 lbs Dexter heavy-duty axles. The Dexter Bearing Kit item #DX58ER is the correct one. This kit is sold per hub and includes new bearings, races, a seal, a tang washer, and a cotter…

view full answer...

Answer 12

Hey Brian! It looks like you decided to go with the MORryde GooseTech #MR27MV, which is a great option. However, the GVWR of your 2023 Keystone Montana 3231CK is 16,680 lbs and this is designed for 18k+. Also, did you verify that your pin box bolt…

view full answer...

Will Pullrite Superglide Fifth Wheel Hitch Work With Demco 5th Wheel Rail Adapter # DM6099

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching