Installing an Electric Brake Controller in a 2007 Chevrolet Uplander with Tow Package

Updated 03/27/2017 | Published 03/24/2017

Products Featured in This Question

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM

(1194)

$19.55

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(108)

$40.06

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$159.00

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3397)

$121.25

Question:

Does your GM wiring harness work for my 2007 Chev Uplander with a towing package or do you sell one. I wish to add a 7-pin hook-up with brake controller and would like to find the parts available. My van originally came with a factory wire harness adapter to plug in under the dash, but I can not find that harness! Thanks, Dave

asked by: David H

Expert Reply:

From my research your 2007 Chevrolet Uplander does not have the wiring for a 7-way trailer connector or a brake controller already installed. So the # 3015-P will not work for you.

In order to install a brake controller, like the Prodigy P2 # 90885 you'll need to hardwire it under your dash using our # ETBC7 kit. I've linked a video showing you this process on a 2006 Uplander. It's a different brake controller but the process will be the same.

You'll also need a 4-way trailer connector before you can use the # ETBC7 kit. If you don't already have one you can install # 118396.