bing tracking image
Q & A Icon

Parts Needed to Add 7-Way and Brake Controller to 2017 Lexus RX 350  

Updated 03/13/2017 | Published 03/11/2017

Question:

Can I add a 7 blade RV wire adapter to a Lexus RX350? Does this vehicle,have the wires to support the 7 blades? Or is there a combination of brake controller and wiring harness that can do this for the RX. Concerned that wiring does not damage car electronics. Are there protection devices too.

1

Helpful Expert Reply:

You will need to start with a 4-way (if you do not have one). For that you would want the # 56083.

From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.

expert reply by:
1
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>