Bolt Hole Pattern of Mounting Studs on Electric Trailer Brake Kit AKEBRK-35-SA
Updated 02/28/2017 | Published 02/27/2017
Question:
What is the mounting bolt spacing on the AEKBRK-35-SA electric brake, side to side and up and down?
asked by: Billy K
1
Helpful Expert Reply:
The mounting flange bolts of the # AKEBRK-35-SA use the standard 4 bolt pattern seen on axles rated for 3,500 lbs. The picture I attached shows the distance between all of the studs.
expert reply by:
Jameson C
1
click to enlarge
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Search Results: weight distribution hitch
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w/ LRE Leaf Spring Suspensions
- Shop: Replacement #20 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems - Qty 1
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w/ LRE Suspension & Correct Track
- Shop: Replacement Shear Spring Bracket for MORryde Suspension Upgrade Kit - Qty 1
- Search Results: seal cross 3762726reference
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Shop: Spare Tire Cover
- Video: Feature Breakdown: 7-Way Molded Trailer Wire Connector, 6' Long
- Video: Comprehensive Review: Trailer Connector Adapter
- Video: All About the 35 Ft 4-Way Trailer Wiring Harness
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Video: Review of the EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal
- Video: An In-Depth Look at the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Video: Curt Soft Trac I Trailer Breakaway Kit Review
- Q&A: Hubs that Fit with Trailer Brake Assemblies AKEBRK-35-SA
- Q&A: Is There A Direct 5 On 4.75 Bolt Pattern Drum To Replace An Older Dexter 8-147 Drum
- Q&A: 3,500 lb Trailer Axle Hub with 5 on 4-3/4 inch Bolt Pattern
- Q&A: 5 on 5 or 5 on 4-3/4 Lug Pattern? How to Determine Which You Have
- Q&A: Fitting Trailer with 3500 lb Axles with Brake Assemblies and Hub/Drums
- Q&A: Measuring Bolt Pattern To Determine Which Electric Brake Assembly to Use
- Search Results: 5 pin flat trailer connector
- Search Results: electric brake break away
- Search Results: trailer lug nuts