Replacement Wheel Studs For Dexter Hubs on 198X Model Wells Cargo Enclosed Trailer
Updated 02/28/2017 | Published 02/26/2017
Question:
I have a 198x model Wells Cargo covered 6 x 12 trailer with a single torsional axle. I need new studs for one hub. the hub is labeled Dexter and 8-248. The studs have 1/2-20 threads and the knurls are 0.628inch OD. Overall length is 2inch and threaded/knurled length is 1 13/16, and threaded length is appr 1 1/8. Do you have these studs?
asked by: Mike
0
Expert Reply:
We have a wheel stud that will work for your application. It is the Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1 # 7-122. I've attached a video review for you.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
- Q&A: Weigh Safe True Tow Weight Distribution System For 7,600 Pound Trailer
- Q&A: Recommended Trailer Hitch for a 2008 Chevrolet GS3500 Short Bus
- Q&A: Looking For New Brakes And Hubs For Trailer With Hub Number 8-201
- Q&A: Replacement Studs for RVD-H-865 7k Hub/Drum
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Size Trailer Rim Should be Used for a 205/75-15 Trailer Tire
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide