Which Hitch is Recommended for 2012 Mazda 3 Hatchback

Question

Question:

Hi,mine is a mazda 3 hatchback 2012 skyactiv and wanna know the difference for the hitch as it shows with or without led,also for the model,i want to know difference between curt or straight hidden,thank you gor your time.

asked by: Bryan

1

Helpful Expert Reply:

For your 2012 Mazda 3 Hatchback the Draw Tite Hitch part # 24843 fits regardless of the taillight style so it would be what we recommend. The taillight style matters when picking out trailer wiring harnesses which is tied to this fitguide so that's why you have the different hitch options based on that as well.

expert reply by: Jameson C

1

Answer 1

Hey Dylan, so Curt has a hitch that fits the 2010 Mazda 3 sedan with the part #C11393 but the #C11383 only fits the hatchback models.

view full answer...

Answer 2

Yes, we do have some cargo carriers that will work with the Draw-Tite Sportframe Trailer Hitch Receiver #24842 you just installed on your 2010 Mazda 3. The carriers that are compatible with a Class I receiver are both from Curt with the part #C18145…

view full answer...

Answer 3

You have done your research. As you have seen, all of the hitches for the 2010 Mazda 3 are Class I trailer hitches. The Draw-Tite and Hidden Hitch models do have the safety notch in them that prevent the insertion of a Class II accessory. This is so…

view full answer...

Answer 4

Hey Erik, The Draw-Tite Sportframe Trailer Hitch Receiver #24984 is designed to fit hatchback models of the 2025 Mazda 3. There isn't currently a confirmed fit for the sedan models yet.

view full answer...

Answer 5

Hi Cameron! For your 2025 Mazda 3 Sedan, I prefer the Curt #C44DR over the Draw-Tite #24982. They are almost identical and have the same weight capacities, but Curt is made in America and Draw-Tite is not. This pretty much always pushed me to the…

view full answer...

Answer 6

All Thule bike racks use the same threaded hitch pin so you can use the Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device #853-5917. This is just the threaded bolt, and you'll need to use the flat washer, lock washer…

view full answer...

Answer 7

Hey Jim, If you're needing something right away the Thule hitch pin lock #TH62RE has the same M12 x 1.75mm thread pitch as the original RockyMounts hitch pin and I physically tested it with the lock #RKY12006 and found that it's compatible.…

view full answer...

Answer 8

Hi Jeff; is the problem that the lock end won't fit in the space you have on the Tesla or that you're unable to lock it? When I reached out to RockyMounts they said they have had dozens of customers use the Curt 23504 which has the same…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

The Hollywood Racks Trail Rider 2-Bike Rack #HR200 weighs about 35 lbs. The Swagman XC 2-Bike Rack #S64650 is lighter at about 26 lbs. The biggest difference between the two is the Swagman rack is rated for 2 bikes at 35 lbs each and the Hollywood…

view full answer...

Which Hitch is Recommended for 2012 Mazda 3 Hatchback

Continue Researching