Recommended Wiring Kit and Other Parts to Flat Tow a 2005 Jeep Wrangler
Updated 01/24/2017 | Published 01/23/2017
Products Featured in This Question
Question:
I have a 2005 Jeep Wrangler and am planning an install of the following Alpha tow bar BX1118 baseplate BX8848 Diode light kit What is needed between the Jeep and the 7 pin connector on the RV. I want something on the Jeep to be covered like the 7 pin on the RV. The wiring kit only shows unterminated wires and no recommendation for a plug. What do you have that I could use that would work?
asked by: Steve
Expert Reply:
Instead of using the # BX8848 wiring kit and adding a connector and umbilical cord between the Wrangler and RV I would use the # RM-15267 kit which includes everything. It will make the installation much easier and have a cleaner look once installed. I've attached an installation video on a 2007 Wrangler Unlimited which will be very similar process to yours.
In reference to your other choices, the Blue Ox Alpha Tow Bar # BX7380 is an excellent choice and includes the safety cables. Also, the Base Plate Kit # BX1118 is a great fit as long as you have the U-channel bumper. If you don't let me know which bumper you have and I'll recommend the correct kit.
Another part you may need is a supplemental braking system. The SMI Stay-IN-Play DUO # SM99251 is a favorite around here because of how reliable it is and it's easier to install than many others. I've linked an install video of the DUO on a 2007 for you as well.
Finally, you'll likely need a high-low adapter. I've attached an article to help you determine the correct rise or drop your setup requries. I've also linked our selection of adapters for you to look at once you know what you need.
In addition to my recommendations I've linked some articles on flat towing that you may find helpful as well.
Product Page this Question was Asked From
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Flat Tow Wiring Harness
- Splices into Vehicle Wiring
- Diode Kit
- Universal Fit
- 7 Blade to 6 Round
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Set up: Blue Ox 4-Diode Universal Tail Light Wiring Kit for Towed Vehicles on a 2021 Jeep Wrangler
- Video: Blue Ox Tow Bar Wiring Kit Installation - 2020 Jeep Gladiator
- Shop: Blue Ox 4-Diode Universal Tail Light Wiring Kit for Towed Vehicles
- Search Results: bx88230
- Search Results: diodes
- Shop: Blue Ox Universal Bolt-On Base Plate Brackets - 5,000 lbs
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Q&A: Recommended Flat Tow Setup For 2022 Ford Escape Plug-In Hybrid Using Blue Ox Tow Bar
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Trailer Wiring Diagrams
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: Must-Have Flat Towing Components
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Flat Tow Parts for a 2025 Jeep Wrangler Sport Towed By A Tiffin RV w/ Quick Connect Air
- Q&A: What is the Difference Between the Blue Ox Patriot BRK2019 & BRK2022?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Flat Towing Set Up for a 2026 Ford Maverick Hybrid
- Q&A: Can I Run the Blue Ox Patriot Braking System On It's Own 6 Volt or 12 Volt Battery?
- Q&A: Recommended Parts for Flat Towing a 2025 Ford Maverick
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing