Trailer Wiring for 2016 Ford Explorer that Does Not Require Splicing Into the Vehicle's Wiring
Updated 11/29/2016 | Published 11/28/2016
Products Featured in This Question
Question:
Does the 2016 Ford Explorers come with the connections installed for a quick wiring harness. I need to install a trailer wiring harness but dont have the knowledge to do a hard wire kit.
asked by: Dewey S
Expert Reply:
Your 2016 Ford Explorer does include all the wiring needed to plug in a trailer connector. If you need a 4-way connector, the Tekonsha Wiring Harness # 118540 is what you can use. This plugs in to the Explorer's wiring beneath the rear of the vehicle on the passenger side.
If the trailer you're going to be towing requires a 7-way connector, the Tekonsha 7-Way Trailer Connector # 118272 is what you will need. This connects to the car at the same location the 4-way does under the rear of the vehicle.
I've included install videos of both wiring harnesses for you.
If you also need a trailer hitch I suggest the Draw-Tite Max-Frame # 76034. This is a Class III, 2 inch hitch receiver that is custom made for your Explorer. It installs into the existing holes on the frame and does not require any drilling.
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Search Results: 118272
- Shop: Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector
- Shop: etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
- Shop: Brake Controller
- Search Results: no sway weight distribution hitch
- Search Results: load distribution
- Search Results: fit guide
- Video: Install: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2016 Ford Explorer
- Video: All About the Curt MV Weight Distribution System
- Search Results: wire harness
- Search Results: class iv trailer hitch
- Shop: 24x60 Reese Cargo Carrier with etrailer Enclosure Cage for 2" Hitches - Steel - 440 lbs
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2017 Ford Explorer C56306
- Video: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package Spec Review
- Video: The Low-Down on the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package-C55384
- Search Results: c55774
- Video: Brophy Mounting Bracket for 4-Pole Flat Trailer Connector: The Breakdown
- Q&A: Installing 7-Way in 2016 Ford Explorer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class