Trailer Hitch and Wiring for a 2017 Chrysler Pacifica Limited

Question

Question:

Besides the hitch what other parts do I need to tow with my 2017 pacifica Limited edition?

asked by: JjjjJjjFfefer

0

Expert Reply:

In addition to the trailer hitch # C13383 for your 2017 Chrysler Pacifica there are a few other items I recommend to set the vehicle up for towing.

I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.

And for trailer wiring you can use # 118712 to add a 4-Way flat connector to the rear of the vehicle. I have included a link to a video showing an example installation of the trailer hitch for you.

expert reply by: Michael H

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

Hello Leah, thanks for reaching out. Yep, it sure will! The etrailer Trailer Hitch Receiver #e98903 actually fits all models of the 2023 Pacifica. That includes the hybrid and non-hybrid models. What will you be using the hitch for? Are you towing a…

view full answer...

Answer 3

Hello Shara, thanks for reaching out. I see that you already ordered the #e98903 hitch which is for the 2025 Pacifica, but I wanted to reply anyway to make sure all your questions were answered. To answer your first question, we do have a video…

view full answer...

Answer 4

Hi Alfredo! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C22RJ will indeed fit your 2026 Hyundai Palisade Hybrid. We haven't had the chance to install one of these quite yet, but I checked with Curt and they actually said…

view full answer...

Answer 5

The Curt #C29UR and the Draw Tite part #76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached…

view full answer...

Answer 6

Between the Curt Trailer Hitch item #C29UR and item #C13383, I recommend the item #C29UR because it doesn't hang down as much. Both hitches are confirmed to fit the 2022 Chrysler Pacifica Hybrid and have identical 4,000 lbs towing capacities.…

view full answer...

Answer 7

For your 2018 Chrysler Pacifica the best choice by far is the Curt part #C65CR because it has a hidden crosstube unlike the Curt hitch part #C13383. Because it gives you a better overall look and has even higher towing capacities it's the one I…

view full answer...

Answer 8

Yes, it will John! The etrailer Hitch item #e98903 does not require any modifications to the bumper when being installed on a 2024 Chrysler Pacifica. Now there is some trimming required on parts below your van that you'll never see. The underbody…

view full answer...

Trailer Hitch and Wiring for a 2017 Chrysler Pacifica Limited

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching