Recommended Trailer Connector For 2014 Infiniti QX80
Updated 12/19/2016 | Published 10/31/2016
Products Featured in This Question
Question:
I have checked under the bumper and I don't see any plug for electricity
asked by: Mohammed
Expert Reply:
I called my contact at Hopkins and they said there should be a wiring connector located behind the rear bumper that a trailer connector can be attached to. I have attached a photo you can check out that may help you be able to identify the connector you would look for.
The trailer connector we offer is part # HM40975. This comes with a bracket to attach the connector on your vehicle. When installed this will give you a working 7-way and a working 4-way trailer connector.
You can use a no-drill bracket like part # 18140. This has an included clamp that can be attached to the trailer hitch and eliminates the need to drill holes on the vehicle to attach the trailer connector.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- 7 Blade
- Plug Only
- Pollak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Do You Have the Replacement Hardware for My Curt Hitch?
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Hitch for a 2024 Toyota Venza That Wont Affect the Hands Free Lift Gate
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacing a Magnum MS2812 With a Victron MultiPlus II or Quattro II Inverter Charger
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Parts Needed To Install 7-Way And Brake Controller On 2011 Chevy Express Van
- Q&A: Can Fuse Tap be Used to Acquire Brake Signal for Brake Controller Install of 2017 Toyota Highlander
- Q&A: Comparing The Curt # C32NR and Hopkins # HM40978 Mounting Brackets
- Article: Towing a Trailer? Let's Talk About Brake Controllers
Mohammed
10/31/2016
I have checked under the bumper and I don't see any plug for electricity