Maximum Distance For Mounting Sway Bracket For Equal-i-zer Weight Distribution System
Updated 10/12/2016 | Published 10/11/2016 >
Question:
According to the instructions, the brackets should be mounted between 29inch and 32inch from the ball coupler. The instructions go on to state ...place a mark at 32” on both sides. This is the center mark for the sway bracket assembly. Question: If the 32inch point is the CENTER mark for the assembly, does that mean one could move the bracket more than 32inch from the coupler? The instructions mention a MINIMUM of 29. What about a MAXIMUM? Thanks,
asked by: Jack
Expert Reply:
The maximum distance the center of the sway brackets can be moved is the 32-inches as described in the installation instructions.
Moving the bracket out further could create a problem when making turns if the spring bar fell out.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 4,000 lbs GTW, 400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 200 lbs
- 300 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: weight distribution hitch
- Search Results: l pin
- Search Results: demco coupler pin
- Search Results: fastway weight distribution hitch
- Video: A Closer Look at the Replacement Hardware Kit for Fastway Sway Control Brackets
- Video: Hands-On with the Inner Link Plate for Equal-i-zer Sway Control Bracket
- Video: Review of Fastway Replacement e2 Weight Distribution System L-Bracket - FA93-02-5150
- Video: All You Need to Know About the Outer Link Plate for Equal-i-zer Sway Control Bracket
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Q&A: Upgrading to 2-1/2 Inch Shank or Using a Reducer Sleeve with Equal-I-zer Weight Distribution System
- Q&A: Recommended SnapPads For A Lippert PSX1 Electric Stabilizing Jack
- Video: The Low-Down on the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems
- Q&A: Trailer Running Lights Only Work While Coupled To Trailer
- Shop: Replacement L-Bracket for Equal-i-zer 6,000-lb to 14,000-lb Weight Distribution Systems - Qty 1
- Shop: Outer Link Plate for Equal-i-zer Sway Control Bracket - 8" Trailer Frames - Qty 1
- Shop: Flint Hill Goods Trailer Coupler Lock - 3-3/8" Span - Blk Steel
- Shop: Demco Trailer Coupler - Cast - Adjustable Channel - eZ-Latch - Zinc - 2-5/16" Ball - 21K
- Shop: Replacement L-Pin Clip for Fastway e2 Weight Distribution Systems
- Shop: Replacement Sway-Control Bracket for Equal-i-zer Weight Distribution - 4,000 lbs GTW
- Search Results: centerline ts
- Search Results: husky center line
- Search Results: stabilizer pin
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Q&A: Distance From Hitch Ball to Brackets Needed for Reese Weight Distribution System RE94FR
- Q&A: Does Andersen Weight Distribution Hitch Have Trial Period
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring

