Lug Nut Thread and Hub Bore for Hub 84656UC3-EZ
Published 10/11/2016
Products Featured in This Question
Question:
Do you have the lug nut thread and hub bore size available for this unit? Thanks
asked by: John
0
Expert Reply:
The lug nuts of the # 84656UC3-EZ are included and are the standard 1/2 inch thread dimension like part # CE11051.
The hub bore is 1.986 inches and for a replacement grease cap it's part # 21-41-1.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Which Bearing Kit Fits 2019 Flagstaff Microlite 21 FBRS
- Q&A: Looking For Brake Assemblies And Hubs For Dexter 4,400 lb EZ-Lube Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Replacement Hub/Drum and Brake Assemblies for 2020 Grand Design Imagine 2600RB
- Q&A: Replacement Spindle for Lippert LCI35 Diamond Torsion Axle on Forest River R-Pod
- Q&A: Replacement Bearing Kit for a # 42 Spindle on a 8,000 lbs Axle
- Q&A: Replacement Brake Drum Hub Assembly For Dexter D44 4,400LB Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: 6-Lug Hub & Drum For 2,200 lb Timbren Axle-Less Trailer Suspension
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: How To Measure And Replace Everything In Your Hub Assembly