2 inch and 4 inch Diameter Recess Mount LED Clearance Light Recommedation
Published 09/23/2016
Products Featured in This Question
Question:
I have 2inch round holes, 3inch round holes, and 4inch round holes drilled into my bumper. I am looking for Gromit style Red LED lights that will fit into these existing holes. Can you help me with the lights that will fit into these holes? Thank You
asked by: Mearle L
Expert Reply:
For the 2 inch light you would want the part # MCL55RB with the grommet part # A54GB and pigtail part # A46PB.
For 4 inch we have the part # STL55RB. You would need the grommet part # A45GB and the same pigtail # A54GB.
I wish we had a 3 inch option, but you may be able to enlarge the 3 inch holes to match the 4 inch ones.
Product Page this Question was Asked From
Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Red Lens
- Trailer Lights
- Clearance Lights
- Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 2 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: How Much Do the Caliber Edge Glide XL Transition Plates Weigh?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Determining Correct Replacement Leaf Spring For Trailer W/ 3000lb Axles and 27" Long Springs
- Q&A: How Many Additional Panels Can Be Added To The Rich Solar RV Solar Charging Kit RS37VR
- Q&A: How Wide is the Curt Weight Distribution Shank C17132?
- Q&A: What Screws Are Needed to Attach a Light to an Aluminum Frame
- Q&A: Correct Nut for Dexter Shackle Bolt for Double Eye Springs - 9/16" Diameter - 2-7/8" Long
- Q&A: How Long is the DeeMaxx Trailer Wheel Lug Nut
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Maintenance Schedule
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Choose the Right Trailer Hitch Class