Difference Between Grease Seals with Same Inner and Outer Diameter but Different Part Numbers
Updated 08/30/2016 | Published 08/29/2016
Products Featured in This Question
Question:
A question about inner bearing grease seal I have a Lippert 5200Lb Axle and wondering what the difference is between the: 10-36 seal Code: RG06-070 vs. GS-2250DL Both seem to meet Lippert spec of: Grease seal, double lip, 2.25inch ID x 3.376inch OD Thanks,
asked by: Alex
Expert Reply:
The Grease Seals 10-36 Pair # RG06-070 and the Grease Seal # GS-2250DL are both double lip seals and have the same inner 2.250 inches and outer 3.376 inches diameters, as you noted. The difference between these two part numbers is that the # RG06-070 comes with a pair of grease seals, 2 seals total, while the # GS-2250DL is for a single grease seal.
Either part number will fit your 5,200 pound spindle that requires a seal with a 2.250 inch inner diameter and 3.376 inch outer diameter. If you go with the # GS-2250DL seal, you will want to order 2 to be able to replace the existing seals on each side of the axle.
Product Page this Question was Asked From
Grease Seals 10-36 - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Grease Seals 10-36 (pair) Feature Review
- Video: Ultimate Overview of the Grease Seals 10-36 (pair)
- Shop: Grease Seals 10-36 - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Shop: Dexter Grease Seals - I.D. 2.25" / O.D. 3.376" - for 12 in x 2 in Hubs after 1998 - Qty 2
- Search Results: cotter pins
- Search Results: jack
- Search Results: rtv
- Shop: Grease/Oil Seals - Double Lip - I.D. 2.125" / O.D. 3.376" for 5.2K to 7K Axles - Qty 2
- Search Results: hub seal
- Search Results: bearing grease
- Search Results: grease
- Search Results: lucas red n tacky
- Q&A: Comparing TruRyde 10-36 Grease and Dexter 10-63 Oil Seal
- Q&A: Cotter Pin Replacement Part for 5,200 lb Axles
- Q&A: Replacement Double-Lip Seal for Lippert Part 122088 with 2.250" ID and 3.376" OD
- Q&A: Are the 10-36 Trailer Grease Seals Rubber Encased Therefore Do Not Require Gasket Maker
- Q&A: Using Gasket Maker on Grease Seals
- Shop: CE Smith Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
- Q&A: How To Find Correct Grease Seal Size For Tandem Dexter Trailer Axles
- Q&A: Recommended Grease Seals w/ a 2.250" ID and a 3.376" OD
- Video: Choosing The Right Awning For Your RV Or Camper
- Article: Most Popular Wheel Bearings
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
on Trailer Bearings Races Seals Caps
