Replacement Master Cylinder and Reverse Lock Out Solenoid, Titan Model 10 Trailer Brake Actuators
Updated 09/20/2010 | Published 09/19/2010
Products Featured in This Question
Question:
I want to switch to disc brakes, I have drum and a titan model 10. I know I need a new master cylinder and I think I need a solenoid for backup. Is there anything else I need to convert my drum actuator to disc?
asked by: Eric
Expert Reply:
As far as a master cylinder, you will need the Master Cylinder for Titan Actuators, # T4747100, which is designed for Model 10 or 20 Titan actuators and is designed for 1-1/4 inch bore disc brakes.
For a reverse lock out solenoid, you will need the Solenoid Valve with Fittings for Reverse Lockout - Normally Open, # T4748800. This solenoid comes with the necessary fittings and installs in-line with the system.
Finally, to protect the solenoid, you will need Replacement Back Up Valve Cover - Plated, # T4836100183. This cover attaches to the back of the actuator over the solenoid.
I have also included a video below showing switching from drum brakes to disc brakes that might help you.
Product Page this Question was Asked From
Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Valve
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: DeeMaxx Trailer Idler Hub for 6,000-lb Axles - 6 on 5-1/2 - Galvanized
- Search Results: trailer leaf springs
- Shop: etrailer Rust-Resistant 5-Leaf Double Eye Spring for 6K Trailer Axles - 25-1/4" Long - Dacromet
- Search Results: trailer brakes
- Search Results: trailer hubs and drums
- Search Results: gs2250dl
- Shop: CE Smith Tie-Down Bracket for Boat Trailers - Galvanized Steel - Bolt On - Qty 1
- Shop: etrailer Rust-Resistant 6-Leaf Double Eye Spring for 7K Trailer Axles - 24-7/8" Long - Dacromet
- Search Results: brake actuator
- Shop: Dexter Trailer Idler Hub for 6,000-lb Axles - 6 on 5-1/2" - Galvanized
- Search Results: surge brake reverse solenoid
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Kodiak Disc Brake Kit-K2R526DS: The Breakdown
- Search Results: tie down hook
- Shop: Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and Stainless Steel - 6,000 lbs
- Video: A Closer Look at the DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Q&A: How to Identify Axles and Can Leaf Springs With Higher Capacity Be Installed
- Q&A: Replacement Leaf Spring for 7k Axle that is 25-1/4 inch
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Do Trailer Leaf Springs Have to Face a Certain Direction
- Video: In-Depth Review of the DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug
- Video: Breaking Down the 2" Lubed Dust Cap and Rubber Plug
- Q&A: What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension
- Video: All You Need to Know About the Replacement DeeMaxx Disc Brake Caliper
- Video: Kodiak Disc Brake Caliper Review
- Q&A: Best Replacement for Atwood 82543 Brake Actuator
- Q&A: Availability of Rebuild Kit for Titan Model 10 Actuator
- Q&A: Best Replacement Actuator for a Titan Aero-6000
on Accessories and Parts
