U-Bolt Recommendation for 2 inch Square Axles
Published 06/24/2016
Products Featured in This Question
Question:
I need u-bolts and the bottom plates for a shoreliner dual axel boat trailer, to hold the leaf springs up. my bottom plate corroded and broke into. The u bolts that I need are squared on top, 2.25 inches wide and 5.25 inches long. I need 8 u- bolts and 4 bottom plates and all the nuts and washers. Can you help me.
asked by: Eric H
Expert Reply:
Is your square axle a 2 inch square axle? I believe it most likely is and you would want the # UBZC12X212X525 for a replacement u-bolt as this is 5-1/4 inches long and fits a 2 inch square axle.
For nuts you would want the # 12ZLN and then for a bottom plate # 117594-G.
Product Page this Question was Asked From
Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Trailer Suspension Parts
- U-Bolts
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Square Axle - 2 Inch
- 1/2 Inch Diameter
- 5-1/4 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Bearing Replacement Recommendation for Timken 07100
- Search Results: trailer leaf springs
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Search Results: l44649 bearing
- Search Results: marine grade trailer hubs and drums
- Search Results: bearings trailer bearings races seals caps
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Video: In-Depth Review of the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Q&A: Galvanized Slipper Springs for Boat Trailer
- Search Results: 1~3/4 inch wide trailer leaf springs
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Search Results: trailer suspension parts
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-1/4" Long
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Replacement Trailer Hub Bearing - L44643
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Q&A: 5 Inch Long U-Bolt Recommendation for Square Trailer Axles
- Video: Breaking Down the Replacement U-Bolt for 2" Wide, Square Axles
- Video: What to Know About the CE Smith U-Bolt
- Video: An In-Depth Look at the Replacement U-Bolt for 2" Wide, Square Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Will Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ Fit Inside a 13 Inch Wheel
- Q&A: How To Flip Square Trailer Axle For Ground Clearance
- Q&A: Will the Yates Keel Pad # YR1203SY Fit on a Crossmember with a Bend
- Q&A: How Does Yates Keel Pad YR1203SY Mount to the Trailer Crossmember
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How To Read A Tire Sidewall
- Article: How to Measure Your Trailer Wheel Bolt Pattern