Does Optronics Side Marker Light # MCL63RB have to be Mounted a Specific Way
Updated 04/27/2016 | Published 04/24/2016 >
Products Featured in This Question
Question:
Is there a top or bottom to these lights? Im asking because I mounted two of these lights at the top corners of my trailer, and they are about 10 feet off the ground. I have to step back several yards before I can see them lit up clearly. Its hard to tell if they are lit up unless I back away from the trailer several yards.
asked by: Matt
Helpful Expert Reply:
Lights that have to be mounted in a specific orientation will have TOP printed on them somewhere which I do not see on light # MCL63RB. The lens is designed to direct the light straight outward so that is likely why it is harder to see them if they are mounted high and you are close to the trailer.
A lens design like that found on # MCL75RB would be a little easier to see at steeper angles. I have included a help article on trailer lighting requirements for you.
Product Page this Question was Asked From
Miro-Flex Thinline LED Trailer Clearance or Side Marker Light - Sumbersible - 4 Diodes - Red Lens
- Trailer Lights
- Clearance Lights
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 4L x 1W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Shop: RV Exterior Lighting
- Shop: RV Interior Lighting
- Video: Optronics Trailer Lights A65PB Review
- Video: Detailed Breakdown of the 35 Ft 4-Way Trailer Wiring Harness
- Video: Bonded 4 Wire: The Breakdown
- Video: All About the 35 Ft 4-Way Trailer Wiring Harness
- Video: Hands-On with the Peterson Piranha LED Clearance or Side Marker Trailer Light
- Video: Complete Breakdown of the Optronics LED Trailer Tail Light-STL42RB
- Video: Let’s Check Out the Peterson Piranha LED Clearance or Side Marker Trailer Light
- Search Results: 12 volt toggle switch
- Search Results: a68p
- Search Results: mcl63ab
- Search Results: trailer wiring
- Search Results: a65b
- Search Results: self tapping screw
- Search Results: 4 flat trailer wiring
- Q&A: Replacement Taillights, Wiring and 7-Way Connector for Car Hauler
- Q&A: Does Peterson Piranha LED Clearance or Side Marker Trailer Light Have Space In The Back For Wire
- Q&A: LED Version of the Bargman 99 Incandescent Clearance Light # 3499001
- Q&A: Having Trouble Installing The Curt C55379 4 Flat Harness In A 4 Flat Mounting Bracket
- Q&A: Is a Base Required for Mounting the # MCL63AB and # MCL75AB Trailer Side Marker Lights
- Q&A: Will ThinLine LED Side Marker Light Fit A A65PB Black Molded ABS Bracket?
- Q&A: How Does the Optronics Light # MCL75RB Install on a Two Wire Lighting System
- Shop: Chrome Bracket and Single Wire Plug for Thin Line Trailer Clearance and Side Marker Lights
- Shop: Peterson Piranha LED Clearance or Side Marker Trailer Light - Waterproof - 4 Diodes - Amber Lens
- Shop: Optronics 12V LED RV Dome Light - Double - 10-5/16" Long x 4-3/16" Wide - White Housing
- Shop: Peterson Mini Identification Trailer Light Bar - Incandescent - White Steel Base - Red Lens
- Shop: Peterson Piranha LED Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Amber Lens



