bing tracking image
Customer Service My Orders
Q & A Icon

Atwood 87701 landing gear switch replacement  

Updated 04/07/2021 | Published 04/06/2021

Question:

I have a 2004 Titanium 32DS37 and I think my landing gear switch needs replacing. The switch currently in the unit is labelled as an Atwood 87701. It 3 switches on the front left, right and both and has 12 wires connected to the back of the switch 6 red and 6 black. It looks like 6 wires go to each relay. I have found replacement 87701 switches but they all have only 6 wires on the back. That leaves me wondering how I would wire in the replacement switch. I have attached photos of the current switch.

0

Expert Reply:

The Atwood 87701-SP three-switch panel that you referred to is now obsolete, no longer made, and none in stock. The only wiring information I could find for you is a poor quality drawing from Atwood/Lippert which I have attached.

We do not have this part, or similar one, available. The only solution would be to create something using other parts like the Stromberg # LG-145236 or the JR Products # 37213635 switches. If it were me I would omit the center switch (both legs at once) and just use one switch for one leg, and one for the other.

expert reply by:
0
Les D
87701-SP drawing for switch
87701-SP drawing for switch
(click to enlarge)
Landing Legs Controls
Landing Legs Controls
(click to enlarge)
Landing Legs Control - Top
Landing Legs Control - Top
(click to enlarge)
Landing Legs Control 12 wire
Landing Legs Control 12 wire
(click to enlarge)
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>