Is there a 5/8 Drive-In Hub Stud with a Knurl/Spline Diameter of 0.615 Inches

Updated 04/22/2016 | Published 04/20/2016

Question:

I would like to know if you have this size wheel stud with a knurl that measures .615 as K58WB316 measures .685?

asked by: Barry H

Expert Reply:

All of the drive-in wheel studs that we carry that have a 5/8 inch diameter have a knurl diameter of approximately 0.685 inches. They are meant to be very tight though. If you need a 0.615 diameter it would seem odd in a 5/8 because a 5/8 thread diameter would be 0.625 inches. The knurl or spline diameter is always larger than the thread diameter.

expert reply by: Michael H