Self Adjusting Brake Setup Recommendation for a Lippert 3,500 lb Trailer Axle
Updated 04/04/2016 | Published 03/31/2016
Products Featured in This Question
Question:
I have lippert 3000# axles 2 that I would like to add the self-adjusting brakes to, but I am not sure what to get. What do you recommend? I will also need seals from what I have been told. Information on Trailer and axle if it helps... 2014 Kodiak 221 RBSL Lippert Axle LCI35-SB-86.5-68.5-NOSP-OS-L-545-7242-18pt-GAWR3000# NV# Axle Variant# V000113205 Cust Part#405638 thanks for your help!!
asked by: Matt
Helpful Expert Reply:
You actually have a Lippert 3,500 lb axle which we definitely have hub drums available for. I searched the part numbers you gave to determine that.
For a hub that will fit your spindle you would want the part # AKHD-545-35-EZ-K which is a 10 inch hub drum that has a 5 on 4-1/2 inch bolt pattern.
Then for brake assemblies you would want the part # AKEBRK-35R-SA for the right hand side and part # AKEBRK-35L-SA both of these are self adjusting assemblies that would fit and work well for you.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Electric Trailer Brakes Are Weak Even with Trailer Unloaded
- Q&A: Trailer Brakes are Very Weak Even After Adjusting Them
- Q&A: Why Would Brand New Trailer Brakes Feel Weak
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Replacement Bearing - 25580
- Video: All About the Grease Seal
- Video: Ultimate Overview of the Trailer Hub and Drum Assembly-AKHD-545-35-G-K
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)