Replacement Trailer Hub Components for Trailstar Trailer with Idler Hubs
Updated 04/01/2016 | Published 03/30/2016
Products Featured in This Question
Question:
2000 Trailstar trailer, 1-1/16inch spindle, EZ Lube design I am looking at replacing every part installed inside the hub, so below is my list of parts needed with measurements if no part number was found. 1 nut for spindle. Either regular nut with retainer or a castle nut should work. Thread on spindle measures 0.7985 2 D washer for spindle. Inside diameter obviously same as the nut above. Outside diameter is 1.65 3 bearings and races. L44649 are the inner and outer bearings. I believe the races are L44610. Correct me if I am wrong. 4 inner seal. 10-60 is the number on the seal. Has a 1.5inch inside diameter. 5 rubber o ring with 1.5inch inside diameter If you could provide me with the part numbers for the list above it would be greatly appreciated. Just want to make sure I am getting the correct parts. Thank you!
asked by: Brian C
Expert Reply:
Hubs that use # L44649 inner and outer bearings are idler type hubs like # AKIHUB-440-2-2K. The correct matching race is indeed part # L44610. We offer these as individual parts but we also offer a complete bearing kit # BK1-150 that includes bearings, races, grease seal with o-ring, tang spindle washer and cotter pin. For a D washer use part # 5-23 and for a castle nut use part # 165931.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: trailer axles
- Shop: Terran Industries Double Lip Grease Seal - I.D. 1.249" / O.D.1.983" for 2K to 2.5K Axles
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What Race Corresponds with Bearing Number L68149 in Timken Kit # TMK52VR
- Q&A: Replacement Disc Brakes for 2006 McClain (MCCL) Boat Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement 126003 Hub for a Lippert 3,500 lbs Axle
- Q&A: Recommended Idler Hub Kit w/a 5 on 4-1/2" Lug Nut Pattern for 2,200 lbs Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision