Inner Diameter of the Bow Roller Part Numbers YR300B, # YR510Y-4, # YR300Y, and # YR450Y

Question

Question:

Need a roller to build a sail furling device. What Is middle diameter dimension of these parts? I need a roller with a large middle dimension. 3 DIMENSIONS, ID, middle D, and OD. Yates roller: YR300B, YR510Y-4, YR300Y, YR450Y

asked by: Tim G

0

Expert Reply:

The inner diameter of all of the rollers you mentioned # YR300B, # YR510Y-4, # YR300Y, and # YR450Y is 1/2 inch.

expert reply by: Jameson C

0

Answer 1

Hey Craig, thanks for your recent order with etrailer.com. We really appreciate your business. I have a couple different options that would work for you. Yates offers the thermoplastic rubber bow roller in yellow, #YR450Y, and blue, #YR450B. The…

view full answer...

Answer 2

We don't have any bow rollers that will fit a roller larger than 1/2 inch in diameter so the best recommendation I could make would be to replace your current setup with something like the part #CE31005PG for a bracket, part #CE10700A for a new…

view full answer...

Answer 3

Based on your attached image, but double check your measurements before ordering, I suggest the CE Smith Bow Roller for Boat Trailers, #CE29542. This 3" PVC roller is of non-marring material, so it won't leave scuffs or marks on your boat.…

view full answer...

Answer 4

The outer ends are 2-7/8 inches in diameter, this and other dimensions are shown in the provided photo.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 10

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 11

Glad to hear you are liking the wheels, Wayne! With the lug holes being a bit recessed on the Kenda #KE22XJ you got, I recommend going with the DeeMaxx Trailer Wheel XL Lug Nut - Chrome - 1/2" - Qty 1 #DE23KR. This is 1-7/8" long and fits…

view full answer...

Answer 12

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Inner Diameter of the Bow Roller Part Numbers YR300B, # YR510Y-4, # YR300Y, and # YR450Y

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching