Replacement Wheel Stud Recommendation for a Trailer Hub that Takes Bearings L44643
Updated 03/22/2016 | Published 03/19/2016
Products Featured in This Question
Question:
Need to replace studs in hub L44643, is RG03-040 the correct P/N? Thanks
asked by: Kevin R
0
Expert Reply:
Most likely the studs you would need are the part # RG03-060 which is what the hub part # 8-91-05UC1 takes that has the two bearing numbers you listed.
Since I don't know what hub you have for certain though it's hard to be totally sure. The hub I referenced is a very popular option though.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-13/16" (Qty 4)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-13/16 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Q&A: Replacement Bronze Bushings for MoRryde CRE3000 Suspension System
- Q&A: Correct Replacement Wheel Mounting Bolts for a Dexter Hub and Drum Assembly for 3.5K Axles
- Q&A: Torque Specification for Lugs Nuts on 5/8-Inch Stud on Dexter Hub
- Article: Which Hitches are Made in the USA
- Q&A: Where Can I Find a Local Installer to Complete My Installation?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can a Wheel That Uses 1/2 Inch Wheel Studs Be Used on a Trailer that Uses 7/16 Inch Studs
- Q&A: Looking For 1/2" x 20 Wheel Studs With .500" Knurl Diameter
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings