Can The Bulldog Square Jack, # BD182500, Be Rebuilt And Are Replacement Parts Available

Updated 08/09/2010 | Published 08/08/2010

Products Featured in This Question

Bulldog Square Jack - Fixed Leg - Sidewind - 12-1/2" Lift - 10,000 lbs

(149)

$201.52

Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity

(64)

$87.92

Replacement Jack Screw and Nut Kit for Bulldog Sidewind Trailer Jacks with 10,000-lb Lift Capacity

(66)

$77.47

Question:

Can these landing gears be rebuilt ? It looks like the piece that the worm gear runs in is stripped out. And where can I buy the parts. Thanks.

asked by: mark k

Expert Reply:

We do sell replacement parts for the Bulldog Square Jack - Fixed Leg - Sidewind, # BD182500.

We have the Bulldog Replacement Sidewind Gears, # BD500212, which are the gears located at the top of the jack that the sidewind crank would be connected to.

We have a replacement nut and screw repair kit that is for the nut and screw that is located at the bottom of the jack. This is the screw that will raise and lower the leg. The available kit is for jacks manufactured after 2003. The part number is # BD500217.

The best way to tell the year of your jack is the color of the nut on the screw. The nut you are looking for will have two 1/2 inch pins on it. The 2003 and newer jacks will have a reddish color nut and the 2002 and older jacks will have a gray square nut.

expert reply by: Jeff D