Installation of Timbren Jounce Springs and Suspension Enhancement Recommendation for 2012 Ford Flex
Updated 03/11/2016 | Published 03/10/2016 >
Products Featured in This Question
Question:
How do these install? Inside the coils? My Flex has the towing package, but sags with our camper.
asked by: Thomas H
Expert Reply:
The Timbren Rear Suspension Enhancement System # TFRFLX that you referenced will install to the inside of the coil spring on your 2012 Ford Flex. The installation instructions for the springs are attached. Timbren states in the instructions that a professional installation is required for these jounce springs.
The suspension enhancement system I recommend for your 2012 Ford Flex is the Air Lift AirLift 1000 # AL60821. These airbags do install inside the coil springs of your Flex. With an airbag suspension enhancement system, you will be able to adjust the airbags as needed when you are towing. These airbags are adjustable from 5 psi to 35 psi so you can tailor the ride for your needs.
These airbags will allow you to maintain your ride quality when you are not towing, as long as the airbag's pressure it decreased. The Timbren # TFRFLX system will give your Flex a stiffer ride when not loaded with the trailer's tongue weight. The installation instructions for the # AL60821 airbag kit are also attached for you.
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Standard Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Suspenbsion Enhancement Option For 2018 Ford Flex Limited AWD
- Q&A: Tips and Tricks for Installing Air Lift 1000 Air Helper Springs In 2013 Ford Explorer
- Q&A: Difference Between Alpha Systems 1021 Self-Leveling Sealant and Dicor
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Install 7-Way and 4-Way on 2016 Ford Explorer Interceptor
- Q&A: Recommended Weight Distribution Hitch for 2022 Keystone Springdale Mini 1750RD
- Q&A: Is a 2" Gap Too Much After Installing Timbren Rear Suspension Enhancement System
- Q&A: Towing Mirror Recommendation for 2013 Ford Explorer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams

