Replacement Drum Brake Wheel Cylinders for Demco KK460SS Kar Kaddy Tow Dolly

Question

Question:

I need both left and right wheel cylinders for my Demco Kar Kaddy KK460SS manufactuered Jan, 2007 VIN 15DK411157A002573. I believe the pn are SB9776 right and SB9777 left. All other components are perfect. I purchased the unit used and it appears that water got in the master cylinder. It was frozen. I purchased a replacement from you and bleed the brakes but got no braking action. Took apart the drums and everything looks new but the wheel cylinders are frozen on both sides. Can you provide these parts and how much are they?

asked by: Neil M

0

Expert Reply:

We can certainly help you with that. You'll need the Right Wheel Cylinder Assembly, part # DMSB9776M and the Left Wheel Cylinder Assembly, part # DMSB9777M

expert reply by: Mike L

0

Answer 1

Hi Tom, I completely understand why you’re frustrated, especially after going through two units and even upgrading to the 18,000 BTU model. One thing I wanted to share that sometimes gets overlooked with the Chill Cube ducted setups is the air…

view full answer...

Answer 2

The Hydraulic Trailer Brake Kit, #AKUBRK-35 that you linked to is for a 10" diameter x 2-1/4" wide and for 4 bolt flange. It does appear that his will fit the application you are asking for, for the 1999 Demco Kar Kaddy Model KK360 with…

view full answer...

Answer 3

I have attached dimensioned photos with your measurements. If you need anything additional just email me back.

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

Hi Ed, In regards to the 3,500 lb Demco Hydraulic Brake Kit #40716-15 and the Hydraulic Trailer Brake Kit #AKUBRK-35-D, starting with the country of origin, the Demco are made in the U.S. and the opposing brakes (made by AxleTek) are made in China.…

view full answer...

Answer 6

It sounds like based on the number you gave that you are looking for the Titan Master Cylinder #DX66FR. This is compatible with drum brake assemblies. If you are looking for the wheel cylinder for a brake assembly then you can use #BP17-030 for Left…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Drum Brake Wheel Cylinders for Demco KK460SS Kar Kaddy Tow Dolly

Products Featured in This Question

Continue Researching