Will CAMCO RV Water Heater Anode Rod # CAM11563 Fit Atwood Water Heater

Updated 02/18/2016 | Published 02/17/2016

Products Featured in This Question

Camco RV Water Heater Anode Rod - Magnesium - 1/2" Diameter x 4-1/2" Long

(63)

$23.36

Camco RV Water Heater Anode Rod - Aluminum - 3/4" Diameter x 9-1/2" Long

(321)

$15.35

Question:

This is directed to Jeffrey L.Thanks Jeffrey for answering back on my previous question,the next question I have is the anode rod length.My 6gal.Atwood H.W.heater has the room inside to support a 9 1/2inch long anode rod measuring from the drain plug.You have in stock these particular sizes of 3/4x 9 1/2inch but for Surburban Mor Flo brands.Would this size be good to use rather than the shorter 4 1/2inch size,even though it could fit Atwood W.H.? Thanks a bunch!

asked by: Doug

Expert Reply:

I called my contact at CAMCO and asked about the Water Heater Anode Rod, part # CAM11563.

They said you would want to make sure you can use an aluminum anode rod. The # CAM11553 anode rod I recommended in your earlier question is magnesium and has 1/2 inch NPT threads. The description for the # CAM11563 states it has 3/4 inch NPT threads, and is designed for Suburban (Mor-Flo) heaters. This will not fit in your Atwood water heater as the threads are too big.

expert reply by: Jeffrey L