New 7K Trailer Axle to Replace a Lippert 6K Trailer Axle

Updated 02/11/2016 | Published 02/10/2016

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2

(700)

$238.61

Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2

(1128)

$195.64

Electric Trailer Brake Assembly - Dacromet - 12" - Left Hand - 5,200 lbs to 7,000 lbs

(31)

$63.92

Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs

(393)

$75.56

Electric Trailer Brake Assembly - Dacromet - 12" - Right Hand - 5,200 lbs to 7,000 lbs

(32)

$68.45

Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs

(379)

$90.27

Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs

(131)

$1295.41

Question:

Need a 7000# rv axle 8 lug complete with brakes hubs and bearings - dont want ez lube or never lube bearings. Replacing on a 2009 excel camper 33foot Current Lippert is NV# 152477 SERIAL # 045-000713052. Can you recommend a replacement including serial #, etc. 70 x 62 6Kinch is written on the current axle - can you tell me what the exact length is on the current axle? Thank you.

asked by: MV C

Expert Reply:

We have 7K options but they not a traditional straight axle. They are more like torsion axles that have their own built-in suspension and do not require an axle beam between the 2 sides. This design would then provide independent suspension!

The most basic option is # TASR7KS01. It has brake mounting flanges but no hubs or drums. This allows you to select the hubs/drums and brakes you want. They do have the grease fitting for EZ lube hubs but you don't have to use EZ lube hubs. You can use a regular hub and manually pack the bearings if you want, # 42866UC3.

For brakes, our house brand etrailer brakes are a great value and high quality; even higher than some of the well known brands! We have manual adjust brakes with dacromet coating (for superior corrosion resistance) # AKEBRK-7L-D and # AKEBRK-7R-D. And we have some self-adjusting assemblies without dacromet, # AKEBRK-7L-SA and # AKEBRK-7R-SA.

We can special order straight axles for local customers only but if you wanted to go that route you should be able to order one to your specifications at a local tractor/trailer supply store. The measurements appear to be 62 inches from spring seat center to spring seat center and 70 inches from hub face to hub face but I recommend measuring to be sure. Those are the measurements that will be needed to order a new axle.