How to Determine if a Trailer has a 13 inch Rim with a 4 on 4 inch Bolt Pattern
Updated 01/11/2016 | Published 01/10/2016
Question:
Do you have a 13 inch 4 hole rim that the bolt on holes centers are 2 3/4 inches apart?
asked by: Crockett
0
Expert Reply:
It sounds like you have a bolt pattern of 4 on 4 inch, but the dimension you listed is slightly off from what this bolt pattern is. What you will want to do is measure from one hole center straight across to the hole center opposite of it. If this dimension is right at 4 inches then you do have a 4 on 4 inch bolt pattern and all of the rims at the attached link will fit.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 175/80-13
- 13 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Largest Wheel Compatible with 4 on 4 Bolt Pattern for Utility Trailer
- Article: Trailer Tire Sizing
- Q&A: Replacement Hub and Bearings for Boat Trailer
- Q&A: How to Use Radial Ply Tires on Wheels with a 4 on 4 Bolt Pattern
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Recommendation for Upgrading to Larger Tires from 5.30-12 Tires on Trailer
- Q&A: What is the Pilot Diameter on a Wheel
- Q&A: Will Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel Fit 4 on 4-1/2 Hub
- Q&A: Possible Solution for Replacing Trailer Bearing L44543
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure for Trailer Hitch Drop
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: What Do I Need To Tow A Trailer?