Grease Recommendation for Blue Ox Sway Pro Weight Distribution

Question

Question:

I read to use Molybdenum grease for my Blue Ox Sway Pro Weight Distribution System. I am having trouble finding it. What can I use instead?.

asked by: Gloria M

0

Expert Reply:

You are correct that the Blue Ox SwayPro weight distribution systems do require the use of molybdenum grease. For that you would want the part # LM54FR.

If you need a grease gun for that you would also need the part # L30200.

expert reply by: Jameson C

0

Answer 1

You are correct that in the Blue Ox SwayPro Owner's Manual they do recommend use molybdenum grease on both the hitch ball and the spring bars. The LubriMatic Moly EP Grease #LM54FR in a grease gun, such as #L30480, will work well. You could use…

view full answer...

Answer 2

For each of your Lippert 3500lb axles you will need the following components. Timken Inner Bearing & Race #TMK73VR Qty 2 Timken Outer Bearing & Race #TMK23VR Qty 2 etrailer Grease Seal #58846 Qty 2 Grease Caps #RG04-040 Qty 1 We do not carry…

view full answer...

Answer 3

Blue Ox recommends LubriMatic Moly EP Grease for the Blue Ox Sway Pro System. For that you would want the part #LM54FR. If you need a grease gun for that you would also need the part #L30200. I have linked both parts mentioned above to this page for…

view full answer...

Answer 4

Yes, the UltraLube Biobased Moly EP Grease part #LM54FR is a molybdenum based grease so it will work with the Blue Ox Sway Pro Weight Distribution Systems like part #BXW1500.

view full answer...

Answer 5

Thanks for reaching out, Randy! You'll want to use regular axle or molybdenum grease, according to my contact at Curt. Not sure why they don't have it in the instructions for your Curt A16 5th Wheel Trailer Hitch for Ram Towing Prep Package…

view full answer...

Answer 6

To lubricate the hitch ball for your Andersen Weight Distribution System I recommend using White Grease #58117. This particular grease is designed specifically for this type of application and will do a great job of reducing friction and protecting…

view full answer...

Answer 7

Since the instructions for the Blue Ox SwayPro Weight Distribution #BXW1000 state that any air-ride shock absorbers, air springs, or automatic leveling systems need to be disabled or deflated to the manufacturer's minimum recommended pressure…

view full answer...

Answer 8

It is not recommended to lubricate where the trunnion bars rub on the brackets that are mounted to the trailer frame. Especially if you have a weight distribution with sway control. The brackets create friction between the bars and brackets when the…

view full answer...

Answer 9

Hey Rick, thanks for reaching out! The Blue Ox SwayPro #BXW1000 maintenance includes making sure the grease zerk fittings on the sockets the arms connect to aren't dry, as well as periodically greasing the hitch ball. All pf this should be done…

view full answer...

Answer 10

Hey Michael! Lippert uses Lithium Complex grease on their axles. You will want to use a Lithium Complex grease like the LubriMatic LMX Industrial Strength Grease item #L11390.

view full answer...

Answer 11

Both the Old Style Head #BXW4011 with the latches and New Style Head #BLU54XR which uses the Pins #BLU72FR have the castor in the head to help prevent sway.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Grease Recommendation for Blue Ox Sway Pro Weight Distribution

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching