Towing Capacity, Trailer Hitch, Wiring, and Transmission Cooler for a 2015 Chrysler Town and Country

Updated 08/25/2015 | Published 08/24/2015

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(814)

$200.52

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(681)

$73.94

Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient

(867)

$96.22

etrailer Ball Mount Kit - Extra-Long - 2-3/4" Rise or 4" Drop - 6,000 lbs

(1375)

$88.30

Question:

With the curt hitch do I need to do anything to my transmission? And what will be my max towing capacity?

asked by: Ryan T

Expert Reply:

The towing capacity of your 2015 Chrysler Town and Country is going to depend on a few factors. Take a look at the picture I have included from the owner's manual. It illustrates the capacity of the vehicle in certain scenarios. At most the van can tow 3,600 pounds.

I do recommend a transmission cooler because when towing or even when just carrying a lot of weight in the van, it puts additional strain on the transmission. A supplemental cooler will help to lower the fluid temperature which is good for the transmission.

The most popular cooler is # D13503. If your van has a closed transmission system (if there isn't a dipstick to check the transmission fluid level) then you will need to have the cooler professionally installed.

For a trailer hitch there are several options with the most popular being the Curt trailer hitch # 13364. The hitch is rated higher than the van so you will need to go by the lower capacity of the van.

Since you plan on doing some towing I recommend etrailer ball mount kit # EBMK4EL. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag.

If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.

And for trailer wiring you can use # C56331 to add a 4-Way flat connector. I have included links showing example installations of the hitch and wiring for you.