Front Hitch Recommendation for a 2013 Ford E-450 RV

Question

Question:

Hi sirs. Please let me know if the front hitch Code 65053, fits on my Ford E450 2013 Coachmen RV. Best regards,

asked by: Jorge A

0

Expert Reply:

Yes, the Draw Tite hitch part # 65053 that you referenced has been confirmed as a fit for your 2013 Ford E-450 RV Cutaway so it would work well for you.

expert reply by: Jameson C

0

Answer 1

The Roadmaster Dual Hitch Receiver Adapters like the 10" part #RM-077-10 cannot be used for towing per Roadmaster. The only similar option we have for towing is something the Curt Multipurpose Ball Mount with 2" Receiver part #D210 or Gen-Y…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 11

Hello Erald, Thanks for writing in Yes, you are on the right track with the Roadmaster Dual Hitch Receiver Adapter #RM83SR and the Flint Hill Goods Cargo Carrier #FHG87ZR. The #RM83SR is made for exactly what you are wanting to do. You can put your…

view full answer...

Answer 12

Hey Donnie, I have great news we do have a front hitch that fits your 2004 Fleetwood Tioga with the Curt front hitch part #33055. This would work great for carrying a bike rack. What kind of bike racks do you have and do you have a bike rack…

view full answer...

Front Hitch Recommendation for a 2013 Ford E-450 RV

Continue Researching