Troubleshooting Stuck Bearing on Spindle

Updated 07/06/2015 | Published 07/04/2015

Question:

I have hub that came off trailer and left the first rig to bearing in place. I am having get that ring off the axel. Any suggestions how to remove the ring. Thanks

asked by: Noel B

Helpful Expert Reply:

Bearings can fit pretty tight on axle spindles. What you can do is apply some penetrating oil like WD40 to the portion of the bearing that is stuck on your spindle and then let it sit for a few minutes. Using a punch or a wedge you can carefully apply force on the outside of the bearings to get them off. You will want to work around the entire bearing so that the force is applied evenly.

Be careful not to damage the spindle in the process.

expert reply by: Jameson C