Hub and Drum Recommendation for 2014 Wells Cargo Fasttrac Single Axle Trailer

Updated 05/19/2015 | Published 05/18/2015

Question:

Can you tell me which drum/hubs would fit a 2014 Wells Cargo Fasttrac? It is 6x12, single axle. Thanks!

asked by: Jeff S

Expert Reply:

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.

Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride. I have attached a picture for you.

If you get back to me with that information I would be happy to help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.

You can then use the filters on the page to narrow down your results to find the correct hubs for your 2014 Wells Cargo Fasttrac trailer.

expert reply by: Leah S