Are Replacement Shoes/Linings and Magents Available for Dexter 12x2 Inch Nev-R-Adjust Trailer Brakes
Published 05/06/2015 >
Products Featured in This Question
Question:
Are the shoes and magnets available for replacement after they start to wear out? Seams pretty costly and wasteful to have to purchase an entire assembly just because the linings start to wear. Starting to weigh going to disc for the very reason that I can buy JUST new pads for the disc system. I run 2,ooo miles a week and trying to control comy costs. Please let me know.
asked by: Jeff J
Expert Reply:
Yes, the brake shoes and magnets are available as replacement parts for 12 inch Nev-R-Adjust brake assembly # 23-464. Some brake assemblies have expensive replacement parts and on those it makes more sense to replace the whole assembly. For replacement shoes, left hand side use # K71-675 and for the right use # K71-676. The magnet is # BP01-225. The cost of a magnet and shoe/lining for one brake assembly costs more than the whole assembly.
Going to disc brakes is a great idea. Not only will you incur less maintenance cost but you will also have better braking and there are fewer moving parts so less chance of something going wrong. I have included a link to our help article that explains the parts needed to add hydraulic disc brakes.
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is The Difference Between 7K Hub/Drums From etrailer And Dexter?
- Q&A: What is Max Air Pressure for Lionshead Steel Modular Trailer Wheel LH44ZR
- Q&A: Bearings and Seals for 2021 Jayco Northpoint 377RLBH
- Q&A: Parts Needed to Flat Tow a 2013-2015 Smart Fortwo
- Q&A: How Do I Determine The Correct Replacement Bearings And Hubs For A Homemade Trailer
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Q&A: How to Find Correct Replacement Hub for 7,000 lb Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


