Brake Mounting Flange Recommendation for a 2k Rated Trailer Axle

Published 05/05/2015

Products Featured in This Question

Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs

(56)

$101.04

Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K

(31)

$25.81

Question:

How is the brake flange added to an existing 2,000lb axle? Does the spindle have to be cut off, flange added and spindle re-welded? Or can it be welded to the end of the tube after removing the hub? I have tried to locate a 2,000 lb axle with a 72inch HF and 58inch SC with a brake flange with no success. Does your company have access to such an axle or is a retro fit my only option. It is too late for me to go with a 3,500 axle as I have already purchased the 7inch brake from you and prefer to stay with the smaller diameter axle. Would appreciate any advice you can provide. Thank you

asked by: Lawrence W

Expert Reply:

What you will want to do is purchase the part # 4-34 as this is a brake mounting flange designed for 2k axles.

The brake mounting flange needs to be welded on perfectly square and concentric and if it is off just a little bit, this can lead to all kinds of problems with trailer ride, stability, tire, and suspension wear. We strongly recommend that brake flanges be welded on by a professional shop that routinely works on trailers and has the equipment required to weld the flange to the spindle.

expert reply by: Jameson C