What Bolt Size is Used to Install Curt Trailer hitch 13200 on a 2014 Toyota highlander

Updated 04/07/2015 | Published 04/05/2015

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(1021)

$268.77

Replacement Hardware Kit for Trailer Hitches

(1222)

$60.70

Question:

What bolt size/thread count are required for this hitch. Curt C13200. Mine didnt come with bolts. There are 3 empty holes on my driver side, and three bolts in the holes on the passenger side. I was just going to pick some up locally if I knew what size/ thread.

asked by: Aaron

Expert Reply:

Curt trailer hitch # C13200 uses six M12-1.25 x 35mm grade 5 hex bolts and six 1/2 inch conical tooth washers. If you bought the hitch from us then the hardware should have been taped up around the receiver or stuffed inside the receiver. If it was missing then give us a call!

Otherwise we can get you the proper hardware if you order # RHK. Put in the hitch number and choose Curt as the manufacturer to get the right kit.

expert reply by: Michael H