Bearing Recommendation with an Inner Diameter of 1.25 inches
Updated 04/06/2015 | Published 04/05/2015
Products Featured in This Question
Question:
BEARING # 15123 AND RACE# LM67010 ARE THESE A MATCH NEED 1.250 I.D. and 2.328 O.D. THANK YOU
asked by: RUSS N
0
Expert Reply:
The bearing part # 15123 that you referenced has an inner diameter of 1.25 inches. The matching race for this bearing though is part # 15245 which has an outer diameter of 2.441 inches.
It sounds like you actually need bearing part # Lm67048 and race # LM67010 since you said you need an ID of 1.25 and an OD of 2.328.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.25 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Bearing For Timken 15123 Trailer Hub Bearing
- Q&A: What is the Difference Between 1.25 Inch Trailer Bearings
- Q&A: Can I use a different seal than what comes with DX22XR
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Q&A: No Trailer Connection on Tekonsha P3 Brake Controller 90195 on a 2000 Toyota Tundra
- Q&A: Availability of Replacement Hub and Drum Assembly to Add Brakes to M1102 Trailer
- Q&A: Replacement Bearing Kit For Dexter 6,000 lb Axle 2266389
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub